Insta360 Ace Pro 2 Flip Screen Hood (CINSEBGB)

Insta360 Ace Pro 2 Flip Screen Hood (CINSEBGB)

A fresh way to frame your world.

The Insta360 Ace Pro 2 Flip Screen Hood unlocks new creative possibilities, giving your shots a classic waist‑level framing style while improving outdoor screen visibility. Designed by Insta360 for seamless compatibility and trusted reliability, it pops open instantly and stays securely in place with its strong magnetic mount.

Key Features

Vintage‑style waist‑level framing
Pair the hood with your flip screen to shoot from a low‑angle perspective for a timeless, retro‑inspired look. Perfect for artistic compositions and everyday storytelling.

Goodbye glare, hello clarity
The hood blocks harsh sunlight, keeping your screen clear and easy to view outdoors. It opens in a single quick motion—simple, intuitive, and ready whenever you are.

Stays steady, protects your screen
A strong magnetic mount keeps the hood secure as you move. When you're done, fold it down to protect the screen from scratches and scuffs.

Notes

• If the hood shifts during installation, use the supplied pry tool to gently lift one corner, adjust, and press firmly. Do not fully remove the hood.
• Do not remove and reinstall the same hood; dust may reduce adhesiveness and cause peeling.
• Always remove using the provided pry tool. Avoid sharp metal tools or forceful pulling to prevent camera damage.
• Contains magnets; keep away from pacemakers and sensitive devices.
• Not recommended for high‑intensity sports or strong‑vibration activities (e.g., road cycling, off‑road riding).
• For best results, use the official Insta360 Flip Screen Hood. Insta360 is not responsible for damage caused by third‑party accessories.

In the Box

• 1× Flip Screen Hood
• 1× Pry Tool
• 1× Alignment Tool
• 1× Magnetic Hood Base
• 1× Application Kit
  • Includes: 1× Screen Cloth, 2× Dust Removal Stickers, 2× Screen Cleaning Wipes

Specifications

• Weight: 23g (0.8oz)
• Dimensions: 71 × 44 × 5mm (2.8 × 1.7 × 0.2in)
• Material: Aluminum alloy, stainless steel

How to Use

Installation

1. Clean the screen with the provided cleaning wipe, cloth, and dust removal sticker.
2. Place the alignment tool (grooved side down) over the touchscreen, aligning it with the camera’s release switch.
3. Peel the backing off the Flip Screen Hood’s tape. Slowly lower the hood into position using the alignment tool as a guide, ensuring correct orientation. Remove the alignment tool after placement.
4. Press down firmly to secure the hood.
5. Lift the middle section to open the hood; the left and right sections will automatically follow. Ensure all three sections latch securely.
   • To close: fold the sides first, then fold down the middle section.

Removal

Insert the pry tool between the hood and the flip screen. Slide it sideways along the edge to detach.

• Note: If the magnetic hood base bends or is damaged during removal, do not reuse it.